tag:blogger.com,1999:blog-66868747580875798112024-03-13T15:37:50.679+03:00Flight Maintenance Engineer Helmi Log..My experience, technical information and defects while working and flying onboard Boeing Business Jet (BBJ).Unknownnoreply@blogger.comBlogger35125tag:blogger.com,1999:blog-6686874758087579811.post-15532087062491168182009-09-07T04:27:00.009+03:002009-09-07T06:46:50.653+03:00Stucked in Sao Tome - Damaged Tyre<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_QlR4hl7D3d4/SqRip5LpyQI/AAAAAAAAB10/qSOjalqADjc/s1600-h/P4306375.JPG"><img style="MARGIN: 0px 10px 10px 0px; WIDTH: 400px; FLOAT: left; HEIGHT: 300px; CURSOR: hand" id="BLOGGER_PHOTO_ID_5378532326851070210" border="0" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/SqRip5LpyQI/AAAAAAAAB10/qSOjalqADjc/s400/P4306375.JPG" /></a><br />A trip to <a href="http://maps.google.com/maps?f=q&source=s_q&hl=en&q=Sao+Tome,+S%C3%A3o+Tom%C3%A9+and+Pr%C3%ADncipe&ie=UTF8&cd=3&geocode=FaH4AwAdhQdlAA&split=0&sll=-5.970566,-36.074486&sspn=0.710463,1.024475&ll=2.372369,19.511719&spn=23.800873,39.506836&z=5&iwloc=A">Sao Tome</a> which is suppose to be just a turn around, end up as a night stop. During transit check found that one of the wheel have a multiple damaged beyond maintenance manual limit. There is few cut , thread chunking cut which pass through the cut protector and exposing the carcass ply, plus there is few more circumferential cuts that makes the wheel is good enough to ground the aircraft.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_QlR4hl7D3d4/SqRi-0NArII/AAAAAAAAB18/uyxklPE-6Jo/s1600-h/P4306376.jpg"><img style="MARGIN: 0px 0px 10px 10px; WIDTH: 240px; FLOAT: right; HEIGHT: 320px; CURSOR: hand" id="BLOGGER_PHOTO_ID_5378532686291840130" border="0" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/SqRi-0NArII/AAAAAAAAB18/uyxklPE-6Jo/s320/P4306376.jpg" /></a><br />If we compare the damaged with reference to tyre nomenclature diagram below, it seem that the damaged is not that serious, however with the speed involved during take-off plus the effect of pressurization in flight, we have to consult the manufacturer first before decision made to release the aircraft.<br /><br /><br /><br /><br /><br /><br /><br /><br /><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/SqRrO78dn-I/AAAAAAAAB2M/TqLcqG7b5IM/s1600-h/tyre-nomenclature.jpg"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 400px; height: 360px;" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/SqRrO78dn-I/AAAAAAAAB2M/TqLcqG7b5IM/s400/tyre-nomenclature.jpg" border="0" alt="" id="BLOGGER_PHOTO_ID_5378541759340847074" /></a><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com1tag:blogger.com,1999:blog-6686874758087579811.post-30191690119280785752009-03-27T14:38:00.000+03:002009-03-27T14:38:04.954+03:00Bird Nest Inspection<div align="justify"><a href="http://dutytravel.blogspot.com/2009/03/seychelles-march-09.html">I was in Seychelles for 3 days</a> and as per company procedure aircraft need to be inspected after 2 days of parking. Among item to be look for during this inspection is any bird nest especially in the hidden area mainly in the wheel well. However to my suprise, i can spot it easily this time. Right on top of the nose gear steering actuator module.</div><div> </div><img id="BLOGGER_PHOTO_ID_5313751821879202658" style="DISPLAY: block; MARGIN: 0px auto 10px; WIDTH: 400px; CURSOR: hand; HEIGHT: 300px; TEXT-ALIGN: center" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/Sb49IOex02I/AAAAAAAABr4/tTUCsRqQGy8/s400/birdnest2.jpg" border="0" /> <div></div><div></div><div></div><div></div><div align="justify">The mother bird still there when i spot her but she flew away when i want to took her photo. Besides any foreign object such as the bird nest, inspection for any leakage of fluid mainly the hydraulic and oil, structural damage as well as the tyre pressure check will be done as well. Although the inspection is not extensive, at least we can prevent any surprise especially on the day of departure with VIP waiting.</div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-84461158641622688312009-03-16T14:11:00.007+03:002009-03-16T14:37:39.687+03:00No 5 Window Cracked<div><div><div><div>Came back from flight while performing the post flight check, i've notice inrregularities at the No 5 cockpit window. This window sometime been called "eyebrow window" located on top of cockpit crew head so it is hardly noticeable if there is a defect on it.</div><br /><a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/Sb44b1OZDFI/AAAAAAAABrQ/IxCxIoErsUs/s1600-h/no5window.jpg"><img id="BLOGGER_PHOTO_ID_5313746661138828370" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; WIDTH: 325px; CURSOR: hand; HEIGHT: 220px" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/Sb44b1OZDFI/AAAAAAAABrQ/IxCxIoErsUs/s400/no5window.jpg" border="0" /></a><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/Sb446_PjynI/AAAAAAAABrY/y7FOhD6Wky0/s1600-h/no5windowcrack.jpg"><img id="BLOGGER_PHOTO_ID_5313747196404025970" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; WIDTH: 301px; CURSOR: hand; HEIGHT: 223px" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/Sb446_PjynI/AAAAAAAABrY/y7FOhD6Wky0/s320/no5windowcrack.jpg" border="0" /></a><br /><br /><br /><div></div><br /><br /><br /><br /><div></div><br /><br /><br /><br /><div></div><br /><br /><div>I've checked it & found that the cracked was in the middle layer as there is no feeling of the crack from outer as well as the inner surface of the window. There is three layer in this window, the middle layer that cracked is the vynil layer. This is the load bearing layer, the next fail safe is the inner layer which is made of glass.<br /></div><div></div><img id="BLOGGER_PHOTO_ID_5313747521776087346" style="DISPLAY: block; MARGIN: 0px auto 10px; WIDTH: 453px; CURSOR: hand; HEIGHT: 261px; TEXT-ALIGN: center" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/Sb45N7WTcTI/AAAAAAAABrg/wL2F-x2fRfU/s400/windowno5.jpg" border="0" /> <div></div><div>Closer look at the edge of the window, there is a sign of overheated, the main probable cause for the crack to happen. This defect is beyond limit and the window replaced as soon after that. </div><div> </div><div><img id="BLOGGER_PHOTO_ID_5313747685792250546" style="DISPLAY: block; MARGIN: 0px auto 10px; WIDTH: 400px; CURSOR: hand; HEIGHT: 276px; TEXT-ALIGN: center" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/Sb45XeWzerI/AAAAAAAABro/n-XGpcY0NsA/s400/no5windowarching.jpg" border="0" /></div></div></div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-466050081546479802008-12-04T20:47:00.000+03:002008-12-04T20:47:00.716+03:00Aircraft Deicing<a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/STLTzUOHQbI/AAAAAAAABZM/mXJ6rxqyczU/s1600-h/DSC01412.JPG"><img id="BLOGGER_PHOTO_ID_5274510992158966194" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; WIDTH: 320px; CURSOR: hand; HEIGHT: 240px" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/STLTzUOHQbI/AAAAAAAABZM/mXJ6rxqyczU/s320/DSC01412.JPG" border="0" /></a> Winter is coming, the formation of ice on top of the wing either during flight in cold area or after aircraft parked overnight in cold weather can alter the aerodynamic of the wing which can effect the lift force during take off.<br /><br />To removed the ice & prevent it from reoccur, deicing fluid will be used which normally will be performed by well trained deicing team.<br /><br />The commonly used fluid is either of ethylene glycol or propylene glycol however the latter is more common due to the fact it is less toxic.<br /><br /><br />Deicing fluid can be devided into 4 different type, type I, II, III & IV. Type II fluids are more commonly used and have thickening agent to prevent their immediate flow off aircraft surfaces. Typically the fluid film will remain in place until the aircraft attains 100 knots or so, at which point the viscosity breaks down due to sheer stress. The high speeds required for viscosity breakdown means that this type of fluid is useful only for larger aircraft.<br /><br /><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/STLSmsfxi1I/AAAAAAAABZE/JF0J97U4CA4/s1600-h/DSC01413.JPG"><img id="BLOGGER_PHOTO_ID_5274509675825564498" style="DISPLAY: block; MARGIN: 0px auto 10px; WIDTH: 320px; CURSOR: hand; HEIGHT: 240px; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/STLSmsfxi1I/AAAAAAAABZE/JF0J97U4CA4/s320/DSC01413.JPG" border="0" /></a><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-36046856697126973912008-11-30T18:22:00.003+03:002008-11-30T18:55:12.366+03:00Poor Maintenance Practices<a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/STK0gGtjq-I/AAAAAAAABY0/fXwzA4aJGbo/s1600-h/DSC01370.JPG"><img id="BLOGGER_PHOTO_ID_5274476577254779874" style="DISPLAY: block; MARGIN: 0px auto 10px; WIDTH: 400px; CURSOR: hand; HEIGHT: 300px; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/STK0gGtjq-I/AAAAAAAABY0/fXwzA4aJGbo/s400/DSC01370.JPG" border="0" /></a><br />I've found this while removing the right hand heat exchangers for cleaning. The clamp was"sitting" on top of the pneumatic duct.<br /><br />It is posible that the ducts have been removed & reinstalled back with the top duct been normalised first, the lower duct then was reinstalled without the mechanic that done the installation aware of the contact.<br /><br />All pneumatic, hydraulic, flight control cable must be inspected for interference with adjacent structures to eliminate unnecessary defect in the future. In the case above, due to vibration, crack can occur which will lead to pneumatic leakage and subsequent damage.<div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com1tag:blogger.com,1999:blog-6686874758087579811.post-43342577487851422552008-08-10T00:00:00.000+03:002008-08-10T00:00:00.772+03:00Refueling Control PanelThis is the place where control for <a href="http://flighteng.blogspot.com/2007/05/refueling-aircraft.html">refueling process</a> took place. Located at the forward edge of right hand lower surfaces. Amount of fuel required base on the flight plan will be routed to certain tanks by controlling the switch of each tank. What unique about BBJ is that, there is additional control for <a href="http://flighteng.blogspot.com/2008/01/auxilliary-fuel-tank.html">auxiliary fuel tan</a>k which is located in forward and aft cargo compartment.<div><br /><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/SJtx5Ff2ogI/AAAAAAAAAfo/Dyd4jujH4iY/s400/fuelpanel.jpg" border="0" alt="" id="BLOGGER_PHOTO_ID_5231900617663226370" /><br />Normally the wing tank will be filled up first followed by the center tank, any extra fuel required then will be routed to the auxilliary tank. Depend on the density of the fuel for that day (fuel density varies mainly due to temperature) the maximum quantity for each wing tank is 3800 kg (4800 liters) and center tank 12750 kg (16200 liters). For auxilliary tank, on BBJ that i work on it has 1 auxiliary tank at the forward cargo and 3 tank in the aft cargo, each can be filled up to 1500 kg (1900 liters) and 2900 kg (3600 liters) respectively.<div><br /></div><div>In each tank there is an instrument that will measure the capacitance of the fuel and from that through fuel processing unit will convert it to kilogram. Weight of the fuel is more relevant for aircraft as it will be added to total weight of an aircraft to determine take off thrust setting for engine for that particular flight.</div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com1tag:blogger.com,1999:blog-6686874758087579811.post-2561754121401024802008-08-02T21:21:00.010+03:002008-08-03T14:16:34.498+03:00Cockpit Window CrackedOne of our BBJ aircraft came back with number 2 cockpit window cracked. No 2 window is the only window that can be opened, it slide backward. This is very dangerous situation where it might lead to rapid decompression however by knowing the construction of the window itself, we can be assured that the safety is not tolerated.<br /><br /><a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/SJSoFfgFuEI/AAAAAAAAAeo/wlJkjsjpeFA/s1600-h/window1.jpg"><img id="BLOGGER_PHOTO_ID_5229989879592892482" style="CURSOR: hand" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/SJSoFfgFuEI/AAAAAAAAAeo/wlJkjsjpeFA/s320/window1.jpg" border="0" /></a><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/SJSoPXdDFWI/AAAAAAAAAew/Dj7l2vC3org/s1600-h/window2.jpg"><img id="BLOGGER_PHOTO_ID_5229990049231344994" style="CURSOR: hand" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/SJSoPXdDFWI/AAAAAAAAAew/Dj7l2vC3org/s320/window2.jpg" border="0" /></a><br /><br /><br /><br /><br />This window is a laminated assembly of layers of glass and vinyl or urethane. The structural inner glass pane carries pressure loads. The vinyl interlayer is structural for bird impact resistance and fail-safe pressure loads.<br /><br />The current window manufactured by<a href="http://corporateportal.ppg.com/NA/Aerospace/Transparencies/CommercialAviation/"> PPG</a> has these layers: an non-structural outer glass pane, a non-structural urethane interlayer, a structural vinyl interlayer, a non-structural urethane interlayer and an structural inner glass pane.<br /><br /><br /><br /><br /><img id="BLOGGER_PHOTO_ID_5230227023625125490" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/SJV_xF3S_nI/AAAAAAAAAfA/Qp7g2aMrLsA/s400/window-layers.jpg" border="0" /><br /><br /><br /><p>A conductive film is located on the inner surface of the outer glass pane, which is a part of the window heat system that supplies the anti-fog and the anti-ice function. </p><p>Rest of the cockpit window have almost the same construction. The passanger window however in stuuctured in layers as well minus the heating element. </p>Few months earlier one of our Gulfstream had a similar incident where the number 1 cockpit window cracked during flight, from the sign of arcing at the top left corner of the window, overheated is the probable caused for the damaged.<br /><br /><br /><br /><br /><a href="http://2.bp.blogspot.com/_QlR4hl7D3d4/SJWSKhqsKbI/AAAAAAAAAfQ/1M5x71C3HSo/s1600-h/gulfstream_window2.jpg"><img id="BLOGGER_PHOTO_ID_5230247251794471346" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; CURSOR: hand" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/SJWSKhqsKbI/AAAAAAAAAfQ/1M5x71C3HSo/s320/gulfstream_window2.jpg" border="0" /></a><a href="http://2.bp.blogspot.com/_QlR4hl7D3d4/SJWSZVqlzZI/AAAAAAAAAfY/1ZstSvR1gV0/s1600-h/gulfstream_window1.jpg"><img id="BLOGGER_PHOTO_ID_5230247506270866834" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; CURSOR: hand" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/SJWSZVqlzZI/AAAAAAAAAfY/1ZstSvR1gV0/s320/gulfstream_window1.jpg" border="0" /></a><br /><br /><br /><br /><br /><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/SJWQ80oRcNI/AAAAAAAAAfI/2RrcLfPJ-uc/s1600-h/gulfstream_window2.jpg"></a><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com2tag:blogger.com,1999:blog-6686874758087579811.post-59526093482456587132008-07-08T12:37:00.004+03:002008-07-09T18:09:41.081+03:00Heat Exchanger CleaningSummer already started and ambient temperature is now getting higher and higher everyday until September when it will start to drop again.<br /><br />In hot weather like this, the airconditioning system (a/c) will have to work harder in order to produce sufficient cool air to chill out the cabin. The heat exchanger is part of <img style="float:right; margin:0 0 10px 10px;cursor:pointer; cursor:hand;" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/SHTQpoap-0I/AAAAAAAAAcI/CA5JSoW0ujY/s320/DSC01004.JPG" border="0" alt="" id="BLOGGER_PHOTO_ID_5221027281671682882" />airconditioning system where transfer of heat from the engine bleed air back to ambient before the air further process by the air cycle machine (heart of a/c system) to produce cool air.<div><br />With dusty enviroment such as here in middle east, the dust or dirt can accumulate in between the fins of the heat exchanger thus reduce the efficiency. Cleaning of the heat exchanger is necessary, with heat exchanger backfush cleaning process.<div><br /></div><div><br /></div><div><br />Here is the photo that i took while we doing it on one of the BBJ, the mix of hot air and water was injected from backside of the heat exchanger so it force out the dust and dirt that trapped inside the heat exchanger itself.</div><div><br /><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/SHTSagle9II/AAAAAAAAAcQ/lWsv3TTW39k/s320/DSC01007.JPG" border="0" alt="" id="BLOGGER_PHOTO_ID_5221029220894831746" /><br /></div><div>There is slight improvement for the output of the a/c system after we did this, however with ambient temperature of 45 deg C, getting sufficient cool air out of the a/c is seems difficult, we still need the use external ground airconditioning cart. </div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-15218151600306799772008-05-21T13:39:00.004+03:002008-05-21T14:43:30.527+03:00How To Change Aircraft Wheel<div><div><div><div>Ever wonder how the replacement of aircraft wheel been done? With big in size and heavy in weight, without special tools it will be imposible to be done. Here is the general description of it so that all of us have some ideas how it is done.</div><div><br /><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/SDQGbzhOSII/AAAAAAAAAaI/71zbJmIQvgc/s1600-h/wheelchg2.jpg"><img id="BLOGGER_PHOTO_ID_5202790544275556482" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; CURSOR: hand" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/SDQGbzhOSII/AAAAAAAAAaI/71zbJmIQvgc/s320/wheelchg2.jpg" border="0" /></a> </div><div>Depend on the organisation, in the company that currently i work with, we had a wheel change trolley where the new wheel is placed as well as the nitrogen bottle needed to charge the wheel.<br /><br /></div><br /><div></div><br /><div></div><br /><div></div><br /><div></div><br /><div></div><br /><div></div><br /><div></div><div></div><br /><div> </div><div><a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/SDQHADhOSKI/AAAAAAAAAaY/zTSP7DLX99A/s1600-h/wheelchg4.jpg"><img id="BLOGGER_PHOTO_ID_5202791167045814434" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; CURSOR: hand" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/SDQHADhOSKI/AAAAAAAAAaY/zTSP7DLX99A/s320/wheelchg4.jpg" border="0" /></a></div><div> </div><div>Aircrat will be jacked from the axle to raised it up from the ground, then one and only nut that hold the entire wheel will be loosen and unserviceable wheel ready to be removed by sliding it out from the axle.</div><div><br /> </div><div> </div><div> </div><div> </div><div> </div><div> </div><div> </div><div> </div><div><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/SDQImjhOSLI/AAAAAAAAAag/sa0MKqrlxTk/s1600-h/wheelchg1.jpg"><img id="BLOGGER_PHOTO_ID_5202792927982405810" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; CURSOR: hand" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/SDQImjhOSLI/AAAAAAAAAag/sa0MKqrlxTk/s320/wheelchg1.jpg" border="0" /></a></div><div>With the wheel dolly, which can be raised and lowered, the weight of the wheel will be supported and the wheel will be slide out from the axle, later on the new wheel be placed on the dolly and slide back to the axle.<br /><br /></div><br /><div></div><br /><div></div><br /><div></div><br /><div></div><br /><div></div><div></div><br /><div></div><br /><div>The big nut again will be tightened and torqued to certain level to ensure proper sitting of the bearing sof the wheel, then it will loosen again and final tightening at lower torque to secure the wheel. </div><div> </div><div></div><div><a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/SDQGvDhOSJI/AAAAAAAAAaQ/FivbKGXAEeE/s1600-h/wheelchg3.jpg"><img id="BLOGGER_PHOTO_ID_5202790874988038290" style="FLOAT: left; MARGIN: 0px 10px 10px 0px; CURSOR: hand" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/SDQGvDhOSJI/AAAAAAAAAaQ/FivbKGXAEeE/s320/wheelchg3.jpg" border="0" /></a></div><div>Take note that on B737 BBJ, the only thing that hold the wheel is this big nut on the left, however this big nut is secured by two extra bolt to prevent it getting loose during operation. </div><br /><div></div><br /><div></div><br /><div></div><br /><div></div></div></div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com2tag:blogger.com,1999:blog-6686874758087579811.post-3671655320054875692008-05-03T11:04:00.006+03:002008-05-03T11:37:01.912+03:00Pre Refueling - Water CheckPrior to carry out <a href="http://flighteng.blogspot.com/2007/05/refueling-aircraft.html">refueling of an aircraft</a>, the quality of the fuel from the fuel truck (bowser) must be checked to ensure it cleanliness as well as the present of water. Dirty fuel can caused fuel filter clogged and water can frezzed at high altitude during flight thus blocking the fuel going to the engine.<br /><br />Normally at the bowser, there a small glass container in which fuel sample from the bowser can be collected. Visually we can check the cleanliness. To check for presence of water, we need to use the water detector capsule.<br /><br /><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/SBwhLR20NyI/AAAAAAAAAXQ/-_x-BB59m9A/s1600-h/BeninAngolaTripoliApr08032.JPG"><img id="BLOGGER_PHOTO_ID_5196064547734304546" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/SBwhLR20NyI/AAAAAAAAAXQ/-_x-BB59m9A/s320/BeninAngolaTripoliApr08032.JPG" border="0" /></a> With water detection capsule attached at the front of the shringe, the fuel that been suck will pass through it. The capsule contain chemical that will change colour when exposed to water molecule.<br /><div></div><br /><div><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/SBwf5R20NxI/AAAAAAAAAXI/Q33H9HsM5RI/s1600-h/BeninAngolaTripoliApr08033.JPG"><img id="BLOGGER_PHOTO_ID_5196063138985031442" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/SBwf5R20NxI/AAAAAAAAAXI/Q33H9HsM5RI/s320/BeninAngolaTripoliApr08033.JPG" border="0" /></a> <div></div><div></div><div></div><div> </div><div>If no water molecule present in the fuel, the capsule colour will remain unchanged from the original which light yellow.<br /></div><div><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/SBwfDR20NwI/AAAAAAAAAXA/QTqYuhSyVyo/s1600-h/BeninAngolaTripoliApr08034.JPG"><img id="BLOGGER_PHOTO_ID_5196062211272095490" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/SBwfDR20NwI/AAAAAAAAAXA/QTqYuhSyVyo/s320/BeninAngolaTripoliApr08034.JPG" border="0" /></a> This is what happen when the water introduced to the capsule. Turned dark blue which indicate the present of water. </div><div> </div><div><a href="http://2.bp.blogspot.com/_QlR4hl7D3d4/SBwdrx20NvI/AAAAAAAAAW4/fdEr0ItcbPY/s1600-h/BeninAngolaTripoliApr08035.JPG"><img id="BLOGGER_PHOTO_ID_5196060708033541874" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/SBwdrx20NvI/AAAAAAAAAW4/fdEr0ItcbPY/s320/BeninAngolaTripoliApr08035.JPG" border="0" /></a> So far i never had an experience this test failed from most of the fuel supplier around the world, aircraft fuel is high quality kerosene that been processed through very strict high quality standard to ensure safety operation of an aircraft.<br /><br />Thanks to Benny from Cotonou, Benin which coorperate & enable me to take the photo of the test.</div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-70807285240853016802008-05-03T10:56:00.002+03:002008-05-03T11:02:11.659+03:00My New BlogsFrom now on i will on ly post technical information in this blog, posting about my experience, fun and joyful article will be in the following blog.<br /><br /><a href="http://dutytravel.blogspot.com/">http://dutytravel.blogspot.com</a><br /><br />For those who had asked questions to me in a past, i post the questions and answers in this blog.<br /><br /><a href="http://askengineerhelmi.blogspot.com/">http://askengineerhelmi.blogspot.com</a><br /><br />Enjoy..<div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-86719097445525214072008-04-12T13:05:00.002+03:002008-04-13T15:48:56.350+03:00Most Eventfull Flight - Morrocco - Benin - Angola - LibyaI just came back from the most "eventful" flight as quoted by maintenance controller to whom we consult incase of defect during line operation.<br /><br />From Abu Dhabi to Al-Ain, landed with Air Traffic Controller no 2 failed, while fueling the fuel to Rabat, the fuel automatic cut-off once the center tank reach it maximum level also failed thus overflow from the underwing fuel tank vent outlet.<br /><br />From Rabat, we go to Cotonou, Benin, then to Luanda, Angola and back to Cotonou. Then we go to Tripoli, Libya, on departure back to Cotonou we have Auxilliary Power Unit automatic shutdown, interrogate APU BITE (Built In Test Equipment) found autoshutdown due to high oil temperature, we departed with engine start using ground air starter. Before start there is CDS (Common Display Unit) fault messages, cycle the circuit breakers clear the defect.<br /><br />Landed safely in Cotonou and opened APU cowl to check any abnormalities, found APU oil scavenge filter pop-out indicates filter is clogged, APU remained inoperative and will be repaired once aircraft returned back to base.<br /><br />On departure back to Abu Dhabi, IRS (Initertial Reference System) ON DC fault light came on, found IRS circuit breaker pop-out, reset back and after 5 minutes IRS fault cleared, then we have both engine control ALT fault and TCAS came on as well, recycle ENG control switch & TCAS circuit breaker cleared both defects. I'm sure all this avionic defect related to less cooling as we dont have airconditioning during aircraft preparation as the APU is inoperative, as it get hot, the electronic units tend to failed and trip off to prevent further damaged.<br /><br />I'm preparing this write-up from 37000 feet on the way back to base, long 8 days trip and of course with full of experience. From Africa with love.......<div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com2tag:blogger.com,1999:blog-6686874758087579811.post-41199494792969035242008-04-09T17:31:00.006+03:002008-04-12T00:06:57.887+03:00Key To Start An Aircraft Engine.<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_QlR4hl7D3d4/R__Ri0_Q_4I/AAAAAAAAAS4/JAg-ndzSXEs/s1600-h/DSC00246.JPG"><img style="float:right; margin:0 0 10px 10px;cursor:pointer; cursor:hand;" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/R__Ri0_Q_4I/AAAAAAAAAS4/JAg-ndzSXEs/s400/DSC00246.JPG" border="0" alt="" id="BLOGGER_PHOTO_ID_5188095692023857026" /></a><br />Is there any key to start an engine? The answer is no. The only thing that is required to start the engine is to turn the start switch knob, here is the pic of the knob so that you can figure out how it is looks like.<br /><br />As an aircraft engineer, from time to time we do need to start the engines to check their performances or perform leak checks after the maintenance task has been performed.<br /><br />After preparation have been made in term of other aircraft systems such as pneumatic, hydraulic & electric, plus after safety measures have been comply with, the knob will b<img style="float:left; margin:0 10px 10px 0;cursor:pointer; cursor:hand;" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/R__QoE_Q_3I/AAAAAAAAASw/gNtzTVFgm6I/s320/DSC00249.JPG" border="0" alt="" id="BLOGGER_PHOTO_ID_5188094682706542450" />e turn to GND position. This will direct the pressurised air from pneumatic system to the aircraft starter that which, through the gearboxes will turn the engine, after certain percentage of engine rotation, the fuel will be introduced that will direct the fuel to the combustion chamber plus the ignition will be light-up at the same time. Here is the pic of the fuel lever for both engines.<div><br /></div><div><br /><div><br /></div><div>As the combustion happen inside the engine, the starter will automatic cut-off by the computer including the ignition, not like in car engines where ignition happen all the time as the piston goes up and down.</div><div><br /></div><div>Once the engine stabilize at idle then the whole process of starting is completed, the same sequence applied to the other engine.</div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-57926433345240062692008-01-25T20:12:00.002+03:002008-03-06T22:17:13.360+03:00Auxilliary Fuel Tank<a href="http://2.bp.blogspot.com/_QlR4hl7D3d4/R5oZMccAtnI/AAAAAAAAARw/zgIxxYGSAoA/s1600-h/DSC00268.JPG"><img id="BLOGGER_PHOTO_ID_5159464024689129074" style="FLOAT: right; MARGIN: 0px 0px 10px 10px; CURSOR: hand" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/R5oZMccAtnI/AAAAAAAAARw/zgIxxYGSAoA/s320/DSC00268.JPG" border="0" /></a><span class="blsp-spelling-error" id="SPELLING_ERROR_0"><span class="blsp-spelling-error" id="SPELLING_ERROR_0">BBJ</span></span> (Boeing Business Jet) can travel longer range compared to conventional 737 due to this extra fuel tank added in its cargo hold.<br /><br />Depend on certain configuration per customer specific need, this extra tank can be placed at aft area of the forward cargo or forward area of aft cargo hold. This is to ensure center of gravity of the aircraft remain close to the center of the aircraft.<br /><br />Each tank can hold around 1800 liters of fuel which if converted to kilograms will be around 1500 kg except the master tank which will have <span class="blsp-spelling-corrected" id="SPELLING_ERROR_1">much</span> higher capacity.<br /><br />All fuel from <span class="blsp-spelling-corrected" id="SPELLING_ERROR_2">auxiliary</span> tank will be routed to the center tank of the aircraft before goes to the engines. What unique about this system is, fuel from auxiliary tank is "pump" to center tank using differential pressure from the cabin which will start once fuel in center tank dropped to certain level.<br /><br />During initial refueling before the flight, the fuel will be added to the wing & center tank fuel first, extra fuel required for the flight then will be filled up in this <span class="blsp-spelling-corrected" id="SPELLING_ERROR_3">auxiliary</span> tank.<br /><br />It's hard to see how this aux tank looks like, i found this extra tank kept in the store, it has been removed form one of the <span class="blsp-spelling-error" id="SPELLING_ERROR_5"><span class="blsp-spelling-error" id="SPELLING_ERROR_1">BBJ</span></span> due extra <span class="blsp-spelling-error" id="SPELLING_ERROR_6"><span class="blsp-spelling-corrected" id="SPELLING_ERROR_2">cargo</span></span> space required for the baggage. if you need extra range for the distance, cargo space has to be sacrifice for the fuel tank...<div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-32231550384200170202008-01-04T20:57:00.000+03:002008-01-04T21:13:31.411+03:00CFM Engine Using BioFuel<a href="http://hshafandy.googlepages.com/ParisAirshow07068.jpg"><img style="FLOAT: right; MARGIN: 0px 0px 10px 10px; WIDTH: 392px; CURSOR: hand; HEIGHT: 311px" height="257" alt="" src="http://hshafandy.googlepages.com/ParisAirshow07068.jpg" border="0" /></a><br /><div>BBJ is using CFM56-27 engine for it propulsion system, what i want to highlight here is in June 2007, the engine manufacturer CFM International has successfully carried out an initial test of a CFM56-7B engine using an ester-type biofuel at Snecma’s Villaroche facility near Paris.</div><br /><div></div><br /><div>CFM56 engines are produced by CFM International (CFM), a 50/50 joint company of Snecma (SAFRAN Group) and General Electric Company.</div><br /><div></div><br /><div>The biofuel used for this test is 30 % vegetable oil methyl ester blended with 70 % conventional Jet-A1 fuel. This test was designed to check the operation of a jet engine using a fuel made from biomass, without making any technical changes to the engine. With this type of biofuel, the target is a net reduction of 20 percent in carbon dioxide (CO2) emissions compared with current fuels. </div><div><br /> </div><div>CFM is running engine tests to develop solutions based on mixtures of jet fuel and second-generation biofuels. For instance, it is currently focusing on the evaluation of alternative fuels made using biomass (offering properties closer to those of jet fuel), which also offer better environmental performance. </div><div><br /> </div><div>For alternative fuels to be used in the aviation industry, there are a number of major technology challenges that must be met, including energy density, thermal stability (avoiding coking at high temperature), use at very low temperatures (freezing) or high temperatures, lubricating effect with materials used, and the availability of mass production facilities worldwide. </div><div><br /> </div><div>Even though it is only 30% "vegetable oil" as a start, it is a major step toward greener emission from aviation industry. </div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-12557548885398781912007-12-30T20:57:00.001+03:002008-03-06T22:10:12.624+03:00Hydraulic Leak in Aircraft SystemAircraft hydraulic is a very complicated system with a lengthy plumbings, joints, connections, valves, pumps and so on. As the aircraft aging, especially on component where the seals start to deteriorate, leaks can occur. This is most common findings during routine inspection on aircraft especially in the wheel well area.<br /><br /><div><div><div><div><img id="BLOGGER_PHOTO_ID_5149833907763192082" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/R3fip3R8oRI/AAAAAAAAAQI/6olumG7p5e4/s320/DSC00520.JPG" border="0" /></div><div></div><div></div><div>Any leakage found should be treated promptly however it is not economical to keep changing any component that have started to leaks. There is an allowable limit set by the manufacturer which allows aircraft that have leakage on its component to be release for flight after details of the leakage been recorded.</div><br /><img id="BLOGGER_PHOTO_ID_5149835290742661410" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/R3fj6XR8oSI/AAAAAAAAAQQ/IF5bq0m79_A/s320/DSC00521.JPG" border="0" /> In the maintenance manual, the allowable limit basically is how many drop per minute. It further will be specified static or dynamic which is with component is off condition or operational. Aircraft engineers will switched on the relevant aircraft hydraulic system and observed the leaks to find whether it is within limit or not. If out of limit then the component must be changed before next flight.<br /><img id="BLOGGER_PHOTO_ID_5149836562052981042" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/R3flEXR8oTI/AAAAAAAAAQY/_xgxZ770RpQ/s320/DSC00522.JPG" border="0" /> Not all leakage is allowable, on plumbing connection for example leakage is not allowed at all. With 3000 psi pressure (that is normal operating pressure for most aircraft) any leakage can drain whole system fluid, the good news is that normally there is 2 or 3 independant hydraulic system available on an aircraft so if one system is down, there is still a backup. <div><br /></div><img id="BLOGGER_PHOTO_ID_5149837494060884290" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/R3fl6nR8oUI/AAAAAAAAAQg/5_-fEQSLhoE/s320/DSC00523.JPG" border="0" /> <div></div><div>All pics sample of leakage is from the aircraft wheel well. </div></div></div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com3tag:blogger.com,1999:blog-6686874758087579811.post-5984011655248040652007-06-15T00:43:00.000+03:002007-06-22T19:06:31.703+03:00Aircraft Maintenance Engineer - Unknown facts by non aviatorWhen we are in the airport, a lot of times we can see the pilots and cabin crew walking by us and begin admiring their glamorous career on board the aircraft, but do we know who is the one responsible for the maintenance aspect of the aircraft that they working on? That person is Licensed Aircraft Maintenance Engineers, he is the one responsible to make sure that an aircraft is save to fly, to carry passengers or cargo's from one point to another point.<br /><br />All aircraft maintenance engineer must have a license from local aviation authority to exercise his privilege which is to certify that an aircraft the he had inspected is fit for release to service.<br /><br />How to become an engineer? Well, first of all you must have an interest on the aircraft itself because if you don’t like it or feel that there is nothing special about an aircraft then it will be more likely that you will not pass the exam or test to get the license. Practical knowledge is essential as it will make it easier to answer the questions in the license exam.<br /><br />There is a lot of aircraft maintenance engineer training school that offering course to become an aircraft maintenance engineer, in fact Malaysia Airlines as well as Air Asia does have their own training department to recruit new aircraft maintenance engineers.<br /><br />Training normally will took around 4 to 5 years, Malaysia Airlines for instance will provide an allowances to the trainees that join their training program however they will be bonded for few years once the trainee succeed his training program and established as licensed aircraft maintenance engineer.<br /><br />Aircraft maintenance engineer can be divided into few categories, it can be Line Aircraft Maintenance Engineer or Base Aircraft Maintenance Engineer, apart from that they furthermore can be divided into trades that they are rated which is either Airframe Maintenance Engineers, Engines Maintenance Engineer, Avionics, Electrical or Radio. Aircraft Maintenance Engineer can be multiple trade as well. Normally Airframe Engineer will hold Engine license. Electrical, Avionic and Radio Aircraft maintenance engineer normally has all 3 rating with them.<br /><br />Line Aircraft Maintenance Engineer normally attached in front line of service as they handle the aircraft for departure or in transit in the airport terminal while Base Aircraft Maintenance Engineer is the person who will inspect an aircraft when it is in the hangar for major inspection.<br /><br />For trade classification, Airframe Maintenance Engineer will responsible to the defect or inspection related to the airframe part of an aircraft which is the fuselage, flight control, hydraulic, air conditioning system, including the passenger seats and so on. Engine Maintenance Engineer for the engine and auxiliary power unit of an aircraft, same goes for other trade. However only Airframe and Engine rated aircraft maintenance engineer has the privilege to release an aircraft back to service (flight) as a whole, for instance if there is a defect of electrical component, electrical maintenance engineer will rectify it however he will only certifying whatever job he did, before the aircraft can fly, the airframe and engine engineer then inspect the aircraft base on the inspection procedure laid down by the manufacturer and then certify that the aircraft is safe to fly. Certification will be in a form of signature plus the approval number from authority or company, stamped or be wrote down on the aircraft legal document which will be on board. One copy of the signed document will be leave on the ground before the door of the aircraft close for departure.<br /><br />Once he put his signature in that document, he is responsible for the safety of the aircraft, the passengers, the cargo as well as the crews. Anything happen to the aircraft, licensed maintenance engineer that released the aircraft for flight will be the one that will be called by the aviation authority for an investigation. Base on this information I’m sure know the readers will realize who has the biggest responsibility once the aircraft lift off from the ground.<div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com6tag:blogger.com,1999:blog-6686874758087579811.post-84256914550727371702007-06-13T01:58:00.000+03:002007-06-13T02:29:46.248+03:00Dr Marten - Aircraft Maintenance Engineers official shoes<div><div><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/Rm8ncZfQjkI/AAAAAAAAAJU/GAYg4PQHNe8/s1600-h/DSC00091.JPG"><img id="BLOGGER_PHOTO_ID_5075318673901653570" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/Rm8ncZfQjkI/AAAAAAAAAJU/GAYg4PQHNe8/s320/DSC00091.JPG" border="0" /></a><br /><div></div><div></div><div></div><div>I just bought myself a pair of low cut black Dr Marten shoes for myself when i was in London. It cost me 50 pounds. Dr Marten shoes become common to aircraft maintenance engineers (AME) due to it oil, fat, acid and alkali resistance. Beside that it bouncing sole is <span class="blsp-spelling-corrected" id="SPELLING_ERROR_0">really</span> make it very comfortable to wear.</div><br /><div></div><img id="BLOGGER_PHOTO_ID_5075321375436082770" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/Rm8p5pfQjlI/AAAAAAAAAJc/geQh9g-KQrE/s320/DSC00095.JPG" border="0" /><br /><div>This is my third Dr Mart actually however to my surprised, it is no more made in England, instead it is now made in Thailand, huh.. globalisation... anyway seems the finishing and quality almost the same, the only different now for sure Dr Mart company profit will soar. </div><div> </div><div><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/Rm8rAZfQjmI/AAAAAAAAAJk/1LfkFV96lBM/s1600-h/DSC00093.JPG"><img id="BLOGGER_PHOTO_ID_5075322590911827554" style="CURSOR: hand" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/Rm8rAZfQjmI/AAAAAAAAAJk/1LfkFV96lBM/s320/DSC00093.JPG" border="0" /></a></div><div> </div><div> </div></div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com1tag:blogger.com,1999:blog-6686874758087579811.post-8782991729751094132007-05-21T23:56:00.000+03:002007-06-13T01:56:53.949+03:00Dessert For VIPs<div><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/RlIIpOxHeZI/AAAAAAAAAIQ/_ljrgps6GAM/s1600-h/ChocCake.JPG"><img id="BLOGGER_PHOTO_ID_5067122035176995218" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/RlIIpOxHeZI/AAAAAAAAAIQ/_ljrgps6GAM/s320/ChocCake.JPG" border="0" /></a></div><div></div><div> </div><div>Most of the food served onboard the aircraft is way above standard of commercial airlines, of course if compare with economy class. Even on some airline that i flew on first class, the food served not as marvelous as what been served onboard our BBJ.<br /></div><div>This chocolate cake by Paind'or was uploaded onboard in Lebanon, surprised me that in Lebanon this luxury cake is available there.<br /></div><div>Below is cheese cake from Riyadh itself, is it yummy?</div><br /><div></div><img id="BLOGGER_PHOTO_ID_5075315478445985330" style="DISPLAY: block; MARGIN: 0px auto 10px; CURSOR: hand; TEXT-ALIGN: center" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/Rm8kiZfQjjI/AAAAAAAAAJM/7GVHRR4GUVY/s320/cheesecake.JPG" border="0" /><br /><div><br /><br /></div><br /><div></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-16336475846741431672007-05-21T23:42:00.000+03:002007-05-21T23:48:33.643+03:00Tips From VIP<div>One of the interesting part of flying with the VIP’s is, most of them very generous especially the princes and the princess. The more difficult the flight which is like long waiting time, long flight such as to United States which very tiring to the crew, most of the time will be well compensated. </div><div><br /><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/RlIFG-xHeXI/AAAAAAAAAIA/eTVA3inYgq8/s1600-h/Tip.JPG"><img id="BLOGGER_PHOTO_ID_5067118148231592306" style="CURSOR: hand" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/RlIFG-xHeXI/AAAAAAAAAIA/eTVA3inYgq8/s400/Tip.JPG" border="0" /></a></div><div><br />I take this shot to give you some idea what I’m talking about. Before landing or sometimes after VIP disembark, cheif pilot will distribute the envelopes of tip money. It’s depend on luck as well, sometimes there is a VIP that always give good amount of tips however when he or she in a bad mood, all of the crew will be left without any envelope.<br /><br />Wanna know maximum amount I received? Put your guess in the comment, I will let you know after 10 guessing.</div><br /><div></div><br /><div>ps: Photo taken after i finished my shopping in Boston.<br /></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com3tag:blogger.com,1999:blog-6686874758087579811.post-15839989010957347102007-05-17T08:16:00.000+03:002007-05-21T20:27:22.762+03:00Refueling the aircraft.How many of us really knows how refueling of an aircraft is done and where is the fuel tank for an aircraft is located? Probably not many know as well what type of fuel aircraft used. Aircraft fuel which is basically a highest grade kerosene will be pumped up by the fuel truck using the hose connected to the refueling panel.<br /><br /><a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/RkvlQOxHeWI/AAAAAAAAAH4/yzDN__yXuz0/s1600-h/DSC00059.JPG"><img id="BLOGGER_PHOTO_ID_" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/RkvlQOxHeWI/AAAAAAAAAH4/yzDN__yXuz0/s320/DSC00059.JPG" border="0" /></a><br /><br />At the fueling panel which is normally on right hand side of the aircraft wing's on majority of the aircraft, there is a control switches that open and close shut-off valve for each tank that fuel have to be added to achived total amount of fuel required for flight.<br /><br />Aircraft fuel tank in general devided in to 3 main area, inside both wings itself as well as under the fuselage which is inside the body of the aircraft itself. Fuel tank in the wings will be filled up first before the fuselage. If happen that you sit in the middle of the aircraft next to the wing area, take not that below your feet is where the fuel tank is located.<br /><br /><br /><div style="CLEAR: both"><a href="http://picasa.google.com/blogger/" target="ext"><img style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; BACKGROUND: 0% 50%; PADDING-BOTTOM: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial" alt="Posted by Picasa" src="http://photos1.blogger.com/pbp.gif" align="middle" border="0" /></a><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/RkvlP-xHeVI/AAAAAAAAAHw/l5YCP3CHh1c/s1600-h/DSC00058-1.JPG"><img id="BLOGGER_PHOTO_ID_" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/RkvlP-xHeVI/AAAAAAAAAHw/l5YCP3CHh1c/s320/DSC00058-1.JPG" border="0" /></a></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com4tag:blogger.com,1999:blog-6686874758087579811.post-81011692813716427132007-04-22T20:15:00.000+03:002007-04-22T20:16:56.366+03:00Oxygen Bottle & Main Batteries<div style="TEXT-ALIGN: center"><a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/RiuYh_6HWaI/AAAAAAAAAGw/K6A6wuGRPmc/s1600-h/DSC00033.JPG"><img id="BLOGGER_PHOTO_ID_" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/RiuYh_6HWaI/AAAAAAAAAGw/K6A6wuGRPmc/s320/DSC00033.JPG" border="0" /></a> </div><br />I have to change the crew oxygen bottle the other day and i want to share something that is unique about B737 <span class="blsp-spelling-error" id="SPELLING_ERROR_0">NG</span> which is the crew oxygen bottle and two main batteries are next to each other. On <span class="blsp-spelling-error" id="SPELLING_ERROR_1">BBJ's</span> that i work on 3 out of 4 <span class="blsp-spelling-corrected" id="SPELLING_ERROR_2">don't</span> have external panel for crew oxygen servicing so basically we have to change the bottle <span class="blsp-spelling-corrected" id="SPELLING_ERROR_3">every time</span> it drop below dispatch limit.<br /><br />Located in E&E bay (avionic compartment) however to change either the batteries or the oxygen bottle, access from the forward cargo is required. Forward bulkhead of the forward cargo need to be removed for access. The panel secured with quick release fasteners which make it easier to be removed.<br /><br />What <span class="blsp-spelling-corrected" id="SPELLING_ERROR_4">I'm</span> trying to highlight here is, in my opinion as well as other working mate that <span class="blsp-spelling-corrected" id="SPELLING_ERROR_5">I've</span> spoken with, we are <span class="blsp-spelling-corrected" id="SPELLING_ERROR_6">surprised</span> to saw this condition as batteries and oxygen which both is considered very sensitive and dangerous item positioned next to each other. I guess Boeing have calculated all the risk to allow this configuration.<div style='clear:both; text-align:CENTER'><a href='http://picasa.google.com/blogger/' target='ext'><img src='http://photos1.blogger.com/pbp.gif' alt='Posted by Picasa' style='border: 0px none ; padding: 0px; background: transparent none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;' align='middle' border='0' /></a></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-51365228072522633302007-04-14T06:34:00.000+03:002007-04-14T06:36:40.142+03:00Birdstrike on radome.<a href="http://2.bp.blogspot.com/_QlR4hl7D3d4/RiBL0lW1PbI/AAAAAAAAAGY/DD1VqfdDH3o/s1600-h/DSC00041.JPG"><img id="BLOGGER_PHOTO_ID_" style="CLEAR: both; FLOAT: right" alt="" src="http://2.bp.blogspot.com/_QlR4hl7D3d4/RiBL0lW1PbI/AAAAAAAAAGY/DD1VqfdDH3o/s320/DSC00041.JPG" border="0" /></a> Aircraft arrived back with sign of birdstrike on nose radome, inspected and tap test test to determine any delamination found nil damaged apart from paint flaking.<br /><br />Further inspection carried out on landing gears, airconditioning intakes and engines show no secondary damaged. Checked with pilot for any changes in engines parameters found nil problem.<br /><br />The impact area cleaned-up and aircraft is ready to fly back. Of course now we are waiting for replacement radome as it looks very unpleasant especially for a VIP aircraft. <div style="CLEAR: both; TEXT-ALIGN: right"><a href="http://picasa.google.com/blogger/" target="ext"><img style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; BACKGROUND: 0% 50%; PADDING-BOTTOM: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial" alt="Posted by Picasa" src="http://photos1.blogger.com/pbp.gif" align="middle" border="0" /></a></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-32549062650844004582007-04-14T06:14:00.000+03:002007-04-14T06:37:05.245+03:00Hydraulic System Transfer<a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/RiBHNFW1PZI/AAAAAAAAAGI/3nGnPBtYd-w/s1600-h/DSC00052.JPG"><img id="BLOGGER_PHOTO_ID_" style="WIDTH: 259px; HEIGHT: 183px" height="217" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/RiBHNFW1PZI/AAAAAAAAAGI/3nGnPBtYd-w/s320/DSC00052.JPG" width="292" border="0" /></a> <a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/RiBHNVW1PaI/AAAAAAAAAGQ/VfFLTLDoSBI/s1600-h/DSC00053.JPG"><img id="BLOGGER_PHOTO_ID_" style="WIDTH: 265px; HEIGHT: 183px" height="218" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/RiBHNVW1PaI/AAAAAAAAAGQ/VfFLTLDoSBI/s320/DSC00053.JPG" width="299" border="0" /></a><br /><br />Hydraulic system on B 737 <span class="blsp-spelling-corrected" id="SPELLING_ERROR_0">divided</span> into 3 system which is A, B & Standby however only A & B system quantity shown in the system page on lower display unit. Standby system reservoir is connected to system B.<br /><br />It can happen that few amount of hydraulic fluid did <span class="blsp-spelling-corrected" id="SPELLING_ERROR_1">transfered</span> to one another during flight even though <span class="blsp-spelling-corrected" id="SPELLING_ERROR_2">theoretically it's not posible. It can happen through movement of shuttle valve that connect both system together when it supplied as back-up such as alternate brake. To normalise it back basically we need to drain it and replenish another system system with new fluid.<br /><br />Experienced 737 engineer know the trick to transfer it with-out to drain and topping-up. Here i would like to share you the trick. From the photo we can see system B is higher, now to transfer from B to A.<br /><br />1. Turn on B emdp pump.<br />2. Set park brake.<br />3. Turn on A emdp pump.<br />4. Turn off system B pressure by operate the flight control<br />5. Release park brake.<br />6. Turn off system A emdp pump.<br /><br />After few repetition we can see the fluid transfered to another.<br /><br />* This is just for information sharing and not to replace the aircraft maintenance manual procedure.<br /><br /></span><div style="CLEAR: both"><a href="http://picasa.google.com/blogger/" target="ext"><img style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; BACKGROUND: 0% 50%; PADDING-BOTTOM: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial" alt="Posted by Picasa" src="http://photos1.blogger.com/pbp.gif" align="middle" border="0" /></a></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com0tag:blogger.com,1999:blog-6686874758087579811.post-62146413779206939072007-04-14T05:47:00.000+03:002007-04-14T06:42:58.092+03:00View of Nile<div style="TEXT-ALIGN: center"><a href="http://3.bp.blogspot.com/_QlR4hl7D3d4/RiBA41W1PVI/AAAAAAAAAFo/zLKPkuFA4Yo/s1600-h/Nile2.JPG"><img id="BLOGGER_PHOTO_ID_" alt="" src="http://3.bp.blogspot.com/_QlR4hl7D3d4/RiBA41W1PVI/AAAAAAAAAFo/zLKPkuFA4Yo/s160/Nile2.JPG" border="0" /></a> <a href="http://4.bp.blogspot.com/_QlR4hl7D3d4/RiBA5FW1PWI/AAAAAAAAAFw/S4jOQSJO0eg/s1600-h/Nile1.JPG"><img id="BLOGGER_PHOTO_ID_" alt="" src="http://4.bp.blogspot.com/_QlR4hl7D3d4/RiBA5FW1PWI/AAAAAAAAAFw/S4jOQSJO0eg/s160/Nile1.JPG" border="0" /></a></div><br /><div style="TEXT-ALIGN: center"></div><br /><div style="TEXT-ALIGN: center"><a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/RiBA5VW1PXI/AAAAAAAAAF4/z7vYDlUx26I/s1600-h/Nile3.JPG"><img id="BLOGGER_PHOTO_ID_" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/RiBA5VW1PXI/AAAAAAAAAF4/z7vYDlUx26I/s160/Nile3.JPG" border="0" /></a> <a href="http://1.bp.blogspot.com/_QlR4hl7D3d4/RiBA5VW1PYI/AAAAAAAAAGA/6IeJjkIilIQ/s1600-h/Nile4.JPG"><img id="BLOGGER_PHOTO_ID_" alt="" src="http://1.bp.blogspot.com/_QlR4hl7D3d4/RiBA5VW1PYI/AAAAAAAAAGA/6IeJjkIilIQ/s160/Nile4.JPG" border="0" /></a></div><br />I was on the way back from Alger, Algeria to Riyadh when our aircraft pass through Egypt, what a view as i can see how Nile River green-up Egypt. On both side of the river there is only desert but what the river contribute to the land is very amazing.<br /><div style="TEXT-ALIGN: center"></div><div style="CLEAR: both; TEXT-ALIGN: center"><a href="http://picasa.google.com/blogger/" target="ext"><img style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; BACKGROUND: 0% 50%; PADDING-BOTTOM: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial" alt="Posted by Picasa" src="http://photos1.blogger.com/pbp.gif" align="middle" border="0" /></a></div><div class="blogger-post-footer"><a href="http://www.zimbio.com/member/helmis"> <img src="http://www.zimbio.com/images/badges/badgeGrey.png?u=helmis" border="0" /></a><br/> <a style="margin-top:2px; display:block; font-size:11px; padding-left:6px; color:#333;" href="http://www.zimbio.com/member/helmis/kudos"> KudoSurf Me! </a></div>Unknownnoreply@blogger.com1